Parking Energy’s Charging Devices for Quick Connectors
Parking Energy offers a comprehensive range of charging devices designed for electric vehicles, from heating boxes to the latest electric vehicle charging technology.
Our unique quick-connect system allows for fast and cost-effective installation and maintenance of the devices.
Different power levels and even devices from different manufacturers can be connected to the same charging system, and all work seamlessly together.
T2Max – Dual Socket tai Dual Cable (OCPP)
- Type 2 sockets or Type 2 cables (5m) and Schuko sockets
- Smart power scaling (1.4 kW – 22 kW)
- Nominal current: 3 x 32 A
- OCPP 2.0.1
- Power: 3.7 – 22 kW per side
- Voltage: 230 V
- Designed in Finland for Finnish condition
EV slow charging box
- For slow charging and heating
- 2 x 3.7 kW Parking Energy Smart-Schuko
- Nominal current: 16 A
- Power: 3.7 kW
- Voltage: 230 V
- Designed and manufactured in Finland
Heating pole box
- 2 x 1.8 kW Theben AT-1 Timer Switch
- Nominal current: 16 A
- Power: 1.8 kW
- Voltage: 230 V
- Designed and manufactured in Finland
- No remote control
Quick Connector
The Quick Connector is part of the electric vehicle charging system. Wall-mounted and pole/post-mounted models are suitable for both indoor and outdoor use. A quick connector can be used to install an electric vehicle charging device, a parking box for car heating, or a combination of both.
The cabling is daisy-chained between the quick connectors from the electrical panel in a three-phase setup (for up to 12 parking spaces). One quick connector is installed between two parking spaces, serving the electric supply for two vehicles simultaneously with a maximum power of 22 kW.
An electric device with a male quick connector can be connected to the quick connector within minutes, without requiring an electrician’s qualifications. Both quick connectors include a protective cover with screws that attaches to the top. The protective cover is removed when connecting a charging device or a charging-heating box. The wall-mounted quick connector may need a backing support plate for installation on a concrete wall or a ladder mounting plate for ladder installation. For the pole-mounted quick connector, an additional D60 pipe splitter is also available.
